This question is regarding Mira Sprint - post 2000 - Shower Spares

Mira Sprint 9.5Kw Leaking from temp control switch

Ok, so i have water running out of the bottom of my Mira Sprint casing. I removed the front cover and started the shower which resulted in a slow but continous flow of water from the heat control switch (cold - Eco - High). Please advise what is the likely cause, and which part / parts i need to fix the problem. Thanks
Asked 7 years ago by Jamie
It is likley to be the flow valve assembly that is leaking however have a closer look just to confirm that, that is the fault see link below.

www.showerdoc.com/mira-elite-go-sport-flow-valve-assembly-with-latching-switch-and-coil-1563-507

Answered 7 years ago by George Thomson

Thanks for your reply.
Had a good look and took the top "clip on" part of the power setting switch off, and re activated the shower. Water came from the valve assembly. Please see attached photo.
I am pretty certain the part i need is "Mira On/Off Switching Assembly - 1788.429" and i need to fix it as soon as i can, so have ordered that part.

Answered 7 years ago by Jamie Edwards

www.showerdoc.com/mira-on-off-switching-assembly-1788-429

Your shower is the 2014 version and the above may be the faulty part.

Answered 7 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Sprint - post 2000 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.