mira sport 10.8kw 2004 model

when i press the button to start shower it starts to pump out water for a couple of seconds then stops this happens on all 3 settings cold, medium, and hot. i then have to switch the shower of to try to restart but then the same happens again. does anyone know the fault..
Asked 9 years ago by Mick

It may be your solenoid valve, you can check it if you have a multi meter, you should have a reading of at least k3.5 ohms, across the two terminals any less and you need a new valve. (Check the valve in the failed state.) (When it has stopped working!)
If there is power getting to the solenoid and it is not operating then there is a good chance that you have a faulty solenoid.
www.youtube.com/watch?v=NzJjzWqxesc
The video is intended as a guide and does not cover every shower.
If you don’t have a multimeter  we sell them with a guide on how to use them for checking and testing the various parts of your shower.
Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses and letting you know much power you have left in batteries
(So you will know if they are good or not) and lots of other jobs, in short they are well worth a few pounds
www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

Answered 9 years ago by Anonymous

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Azora/Sprint/Sport/Zest Thermal Cut-out (TCO) - 416.41

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Thermal Cut Outs Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Thermal Cut Outs

For any other support request please get in touch.