mira sport max
The things to check firstare:
1 That the main valve cominginto your house is fully open.
2 Then check that the valve on the line to the shower isfully open.
If these valvesare not fully open then there may not be enough water getting to your shower to cool it properly the overheatsafety device will turn the power offuntil it cools Then it all starts again. Check the inlet filter is not blocked.
Make sure that the shower head isclean and clear, that the hose isn’t kinked (this can happen just behind thehand set where it is difficult to see) also check the inside of the hosealthough it can look OK on the outside it could have collapsed internally
The other possibility is a faultyflow/stabilizer valve not allowing the correct amount of water into the shower.
A rough check is to remove theshower head turn temperature control to fully hot the water coming out of thehose should be a bit more than a dribble then turn to fully cold and it shouldbe coming out at full flow.
Ifthere is not much difference between the two then you could have a faulty flowvalve.
Carry out this checkafter you check the inlet valves.
Answered 10 years ago by Anonymous
View Product and Order Online:
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Mira Azora/Sprint/Sport/Zest Thermal Cut-out (TCO) - 416.41
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Thermal Cut Outs Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Thermal Cut Outs
For any other support request please get in touch.