mira supreme

Hi , the water pressure is fine ( powerful ) when on cold . Last week the shower was working great but suddenly the pressure is quite low ( 50%+ less ) when I turn the temperature up . Was hot when only on number 2 , now required to go to 7 to get same heat and the pressure is down .Do you think this part is the problem. Thanks Jim
Asked 5 years ago by james
I think you need to check the micro switches on your pressure switch and the element on top of the heating can.

class=ExternalClass16CB337A17124FC48EB9939EBABAAF37>This could be down to melting or arcing terminals inside the shower or a micro switch or element has blown only giving you half heat.

Check that the micro switches supplying the elements are ok - www.youtube.com/watch?v=4ESXNpkzo1o

If these are ok test that the elements in the heating can / heat exchanger are both ok -
www.youtube.com/watch?v=wzPt1hsfVq4

Answered 5 years ago by Liam Corrigan

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Azora/Sprint/Sport/Zest Thermal Cut-out (TCO) - 416.41

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Thermal Cut Outs Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Thermal Cut Outs

For any other support request please get in touch.