No Heat from shower Mira sport

I have good flow when on cold and less pressure on full hot.

Until recently the best compromise for hot water was about half way on the dial. Now even on full hot, the water is now luke warm.. Whats gone wrong and what needs to be replaced to give us heat back in our shower..

Asked 11 years ago by Anonymous

 It may be a faultyelement in the heating tank (there are two, three in most 10kw showers) you cancheck them with a multi meter you should have a reading of around 12>18ohms.

If you have power to the elementsand no heat it's probably the elements, no power to the elements thenit's probably a micro switch.

 

If you don’t have amultimeter  we sell them at £10 each with a guide on how to use them forchecking and testing the various parts of your shower.

 

Apart from helping to fix yourshower, they are really useful for checking you have a power supply toappliances, for checking fuses, letting you know much power you have left inbatteries

(so you know if they are dud ornot)  and lots of other jobs, in short they are well  worth the £10.

 

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

 

Answered 11 years ago by The Shower Doctor

View Product and Order Online:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Azora/Sprint/Sport/Zest Thermal Cut-out (TCO) - 416.41

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Thermal Cut Outs Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Thermal Cut Outs

For any other support request please get in touch.