This question is regarding Mira Vie - Shower Spares

Mira Vie - stuck on hot

The temperature dial seems to be very ineffective - even on a mostly cold setting the shower temp is very hot.



Also immediately after turning off the shower there is a rushing sound which diminishes after 4 or 5 seconds.
Asked 12 years ago by Anonymous
Check the shower hose is not kinked or collapsed internally and the head is clear.
Check that incoming mains water stopcock and any isolation valve in feed to the azhower are fully open.
Check with your  supplier if there has been any reduction in water supply flow or pressure.
Check that gauze filter in inlet to solenoid valve is clear.
If all above are ok then it is the stabiliser/flow valve at fault , repair kit can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/mira/MIRA-1539-379-Mira-Flow-Regulator-Assembly-1539-379

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Mira Vie - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Mira Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Mira Electric Showers

For any other support request please get in touch.