luke warm water

i cannot get hot water only luke warm i have replaced the thermal cut out switch, the water does not heat up but remains luke warm,. the water flow is the same if it is selected on hot or cold. there is a constant drip of water from the selector switch as if a rubber seal is not sealing. could you advise on what part would be required to rectify the problem.
Asked 11 years ago by Anonymous

It may be a faulty element in the heating tank (there are two, three in most 10kw showers) you can check them with a multi meter you should have a reading of around 12>18 ohms.

If you have power to the elements and no heat it's probably the elements, no power to the elements then it's probably a micro switch.

If you don’t have a multimeter we sell them at £10 each with a guide on how to use them for checking and testing the various parts of your shower.

Apart from helping to fix your shower, they are really useful for checking you have a power supply to appliances, for checking fuses, letting you know much power you have left in batteries

(so you know if they are dud or not) and lots of other jobs, in short they are well worth the £10.

http://www.showerdoc.com/installation/electrical-products/SKYTRO-600-005-Digital-Multi-Tester

The selector switch is also a pressure switch and this needs replaced if it is leaking.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the MX Inspiration LX - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our MX Group Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement MX Group Electric Showers

For any other support request please get in touch.