MX Inspiration LXi 10.5Kw produces only warm water
However it now is only producing barely warm water when set to max heat position and temperature set to max 11.
I have checked the elements and get reading of 17.8ohms on all 3 elements.
I have also replaced the micro switches as a precaution and nothing has changed
Can you suggest anything???
The things to check firstare:
1 That the main valve cominginto your house is fully open.
2 Then check that the valve on the line to the shower isfully open.
Make sure that the shower head isclean and clear, that the hose isn’t kinked (this can happen just behind thehand set where it is difficult to see) also check the inside of the hosealthough it can look OK on the outside it could have collapsed internally
The other possibility is a faultyflow/stabilizer valve not allowing the correct amount of water into the shower.
A rough check is to remove theshower head turn temperature control to fully hot the water coming out of thehose should be a bit more than a dribble then turn to fully cold and it shouldbe coming out at full flow.
Ifthere is not much difference between the two then you could have a faulty flowvalve.
Carry out this checkafter you check the inlet valves.
Answered 11 years ago by Anonymous
View Spares and Order Parts:
MX Inspiration LXi (White / Satin) Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the MX Inspiration LXi (White / Satin) - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our MX Group Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement MX Group Electric Showers
For any other support request please get in touch.