This question is regarding MX Inspiration LXi (White / Satin) - Shower Spares

Water too hot

Even at the lowest temperature setting, the shower is too hot on full power, it never used to be. I have to turn to medium power in order to get it cool enough but the flow is then quite weak.



Great full if you could how this might be fixed.
Asked 9 years ago by Anonymous

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly, the overheat safety device will turn
the power off until it cools, then it then it starts to heat again and so on.

 

Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally

The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.


 

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the MX Inspiration LXi (White / Satin) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our MX Group Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement MX Group Electric Showers

For any other support request please get in touch.