This question is regarding Neptune Solo - Shower Spares

Neptune Solo 8.5Kw

When I turn on the shower at first it works fine. When I turn if off, instead of the water running for a few seconds it stops immediately, followed by boiling noise. On restarting there is no on-light and the initial flow is scalding hot followed by cold for a few seconds then the light comes back on and the temperature returns to normal. The shower is quite dangerous if you are not careful. Is there a part that needs replacing please?
Asked 11 years ago by Denis

One of the switches on the pressure switch is stuck in the on position and will need replaced

http://www.showerdoc.com/galaxy-pressure-switch-solo-sg06057

 

You can replace the switches individually however it may be easier to replace the complete pressure switch.

http://www.showerdoc.com/micro-switch-21-amp-2-pin-universal

 

 

 

Answered 11 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Neptune Solo - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Neptune Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Neptune Electric Showers

For any other support request please get in touch.