MK3 NEWTEAM Electric Shower going hot/cold
when i showered yesterday it was cold and i had to turn the dial up to 6.This morning it was on 6 it was red hot I turned it down to 3 it was fine for about five minutes then it went cold and had tobe turned up to 6.Please can you help ?
The things to check first are.
1 That the main valve coming into your house is fully open.
2 Then check that the valve on the line to the shower is fully open.
If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly the overheat safety device will turn
the power off until it cools Then it all starts again
Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally
Answered 12 years ago by The Shower Doctor
View Spares and Order Parts:
NewTeam Newteam 7.8 8.5 9.5 10.4 (Mk3) Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Newteam 7.8 8.5 9.5 10.4 (Mk3) - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our NewTeam Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement NewTeam Electric Showers
For any other support request please get in touch.