New Team 9.5 - Low pressure light

I have the above shower and it has an intermittent fault with the low pressure warning coming on. From a lot of the blogs on your website the solanoid valve sounds like the most likely cause. Could you suggest other causes or is the above a sensible assesment?
Asked 13 years ago by Jon
Normally the solenoid valve is either working or not and if you still have water through the shower when the low pressure light is on then it is unlikely to be this at fault.
Before you buy anything check that the water mains stopcock and any isolation valve to the shower are fully open and that mains supply at kitchen cold tap is ok regarding pressure and flow.
If all of these are ok then it is likely to be the Pressure Switch assy at fault. It can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/newteam/NEWT-SP-092-0291-Pressure-Switch-Assembly

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Newteam 7.8 8.5 9.5 10.4 (Mk3) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our NewTeam Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement NewTeam Electric Showers

For any other support request please get in touch.