This question is regarding Newteam 7.8 8.5 9.5 10.4 (Mk3) - Shower Spares

Newteam Ten four shower

Over the last few weeks the shower has been cold on setting 4 I have had to turn the control up to 8.

The next time I use the shower it would be scalding and had to be turned back to four. It is now happening more often and for the past three days I have had to use it on setting 8.

Can you please advise?
Asked 11 years ago by Anonymous

Forgetting about the temperature turn the shower from fully hot to fully cold at fully hot you should have not much more than a dribble coming from the hose and on fully cold you should have a good strong flow, if you do not have this difference then you may have a faulty flow/stabilizer valve.

Answered 11 years ago by Anonymous

In my earlier submission I neglected to mention that the low pressure light is constantly on. I have done as you suggested turning the control to fully hot and fully cold. Although there is a noticeable difference in flow rate when I turn it above 6, the flow is still reasonably strong at fully hot. Sorry for confusion.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Newteam 7.8 8.5 9.5 10.4 (Mk3) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our NewTeam Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement NewTeam Electric Showers

For any other support request please get in touch.