shower force 8.5 low pressure light on
It may be your solenoid valve you can check it if you have a multi meter, you should have a reading of at least 3.5 ohms, across the two terminals any less and you need a new valve.
If there is power getting to the solenoid and it is not operating then there is a good chance that you have a faulty solenoid.
The other possibility is a faulty "Solenoid PCB" the usual fault but not always, is no continuity on the neutral from the solenoid to the opposite side of the board
It is best to replace both of these at the same time New Team do a kit that replaces both parts.
Fitting the PCB and solenoid is not particularly difficult the only difficult bit is you have to replace a micro switch which is the centre switch in a row of three, they are operated by rocker type levers and a cam the fiddly bit is to make sure that the spring on the centre rocker is in the correct position and that the other levers all line up correctly
Take some photos before you start
Answered 11 years ago by The Shower Doctor
View Spares and Order Parts:
NewTeam Newteam 7.8 8.5 9.5 10.4 (Mk3) Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Newteam 7.8 8.5 9.5 10.4 (Mk3) - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our NewTeam Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement NewTeam Electric Showers
For any other support request please get in touch.