Duraspeed / Duraspeed 2 Showe

I am trying to purchase the ceramic shaft seal that goes behind the impeller of the pump the part is not shown here, any ideas as where I can get them from? Thanks
Asked 8 years ago by Michael
I am afraid not, these seals really need to be fitted by machine.

From past experience they are difficult to fit, and not always successful, also you can have problems with the seal at the other end of the pump if it is disturbed and there is a large amount of work involved.

Answered 8 years ago by Anonymous

Hi many thanks for replying , I am an engineer and fitted seals all my life over fifty years so I know the issues I am trying to find where I can purchase them if not from the manufacturer I will try an independent once I have measured the side with my vernier calipers

Answered 8 years ago by Michael Jackmam

If I remember correctly they are 8mm

We used to replaced them many years ago but the failure rate was to high to be acceptable.

However I wish you all the best.

Answered 8 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the NewTeam Duraspeed / Duraspeed 2 Pump Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our NewTeam Shower Pumps Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement NewTeam Shower Pumps

For any other support request please get in touch.