This question is regarding NewTeam Victoriana Thermostatic Valve - Shower Spares

Thermostat

Hi I've just replaced the seals and thermostat wax spigot watching Barrie's excellent u tube demo for a Gummers valve I didn't quite spot which way round the thermostst spigot was located but have put it with brass to wall and wax end to outside, the brass spigot didn't appear to be very tight within the plastic fins of the thermostat, should it be. Everything works fine but I can't get much of a temperature its warm and ok but can't get it to be hot I've turned the floe handle fully on and indexed the knob to the left on the splines and appear to have reached my limit of adjustment on that. Is it just that the thermostat cuts off at warm? Many thanks for your help. Arthur
Asked 6 years ago by Mr. Arthur
www.youtube.com/watch?v=bQnHGckfW-g

This may help.

Answered 6 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the NewTeam Victoriana Thermostatic Valve - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our NewTeam Exposed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement NewTeam Exposed Shower Valves

For any other support request please get in touch.