Some extra information
Call us on 0131 538 4343

Mazy a shower

This question is regarding P7EE Shower Mazuma (1996 - Current) Shower Spares

I have a new shower from
Home pro Thailand the problem is the hot water control when the marker is at 3 o'clock it goes very hot and when you move the marker by a very small amount
It goes very cold
Could you help please.

Asked 2 years ago by Sucheera Whitehurst
The things to check first are:

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water getting to your shower to cool it properly, it overheats the safety device cuts in (TCO) and turns the power off to the elements until it cools down and it all starts again!

Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally

The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.

There is a link below that explains the above.
Answered 2 years ago by Barrie Seabright
View Spares and Order Online:
View Spares

You send it, we mend it.