Expression 5005 Pulsing

the shower will start up ok in cold and in medium will go to setting 6 but when put into high it just starts to pulse on and off drawing a fair bit of power. mains supply is checked and ok.
Asked 12 years ago by Anonymous

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly the overheat safety devicewill turn
the power off until it cools Then it all starts again

Make sure that the shower headis clean and clear, that the hose isn’t kinked (this can happen just behind thehand set where it is difficult to see) also check the inside of the hosealthough it can look OK on the outside it could have collapsed internally


 

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Redring Expressions 500s 9.5kw - (53673501) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Redring Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Redring Electric Showers

For any other support request please get in touch.