Expressions 500s 9.5kw
If I start the shower in the 'med' position it will stop/start for a while until it is stabilised. Again, in this case I will let it stabilise before turning into the 'high' position. Once turned into the 'high' position it will either work fine or stop/start for a while until stabilised. When the high is finally working well there is good pressure/heat.
Which part may need replacing?
Thanks.
It is difficult to say from your description however I am pretty convinced that you have a problem with the solenoid valve, so it will need replacing.
http://www.showerdoc.com/redring-solenoid-valve-complete-93590722
Answered 9 years ago by Anonymous
View Spares and Order Parts:
Redring Expressions 500s 9.5kw - (53673501) Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Redring Expressions 500s 9.5kw - (53673501) - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Redring Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Redring Electric Showers
For any other support request please get in touch.