This question is regarding Redring Expressions 500S Shower (2006 - Current) - Shower Spares

Shower Fault

When I turn on the shower it will begin turning on and off very quickly after a while it settles down, this only happens on medium or high settings on cold it works normally. I have replaced the phased shutoff relay but this hasn't made a diffrence, is there anything you can surgest?
Asked 12 years ago by Michael
This is likely to be either the isolation switch having gone high resistence or the solenoid coil . When the unit cuts out check the power at the connector block if less than 230volts then it is the switch.
If power ok then it is lkiely to be the solenoid coil , if you click on the link below it will take you to a video clip showing how to test and if required change the coil and allow online ordering.

http://www.showerdoc.com/HYDR-27600-Solenoid-Coil--Universal-(no-Valve)-27600

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Redring Expressions 500S Shower (2006 - Current) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Redring Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Redring Electric Showers

For any other support request please get in touch.