faulty shower
This fault is caused by a lack of pressure.
The things to check first are.
1 That the main valve coming into your house is fully open.
2 Then check that the valve on the line to the shower is fully open.
If these valves are not fully open then there may not be enough water
getting to your shower to open / close the safety device that allows power through to the elements
Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally. If these are ok.
Forgetting about the temperature turn the shower from fully hot to fully cold at fully hot you should have not much more than a dribble coming from the hose and on fully cold you should have a good strong flow, if you do not have this difference then you may have a faulty flow/stabilizer valve.
Answered 11 years ago by Anonymous
Answered 11 years ago by Anonymous
View Spares and Order Parts:
Redring Expressions 550s 8.5kw - (53674001) Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Redring Expressions 550s 8.5kw - (53674001) - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Redring Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Redring Electric Showers
For any other support request please get in touch.