Putting front cover back on.

I had to take the front cover off my Redring because the control knob was broken. I bought a replacement from yourselves and have put it back into the front cover but need to know what way to set the knob correctly. Can you help please?
Asked 5 years ago by Eric
Mmm!

This is not much help now, but in future always set any knobs to 12 'O' clock when you remove the cover, then you know where to replace them.

At the present moment the shower is probably working OK but the temp setting is in the wrong place.

So turn the knob to where you would usually have it if the shower is to cold then remove the cover and knob then turn the knob a few degrees to the cold side and refit, check the temp if it is still to cold then repeat the above until the temperature is correct, if the shower is to hot then the reverse of the above

Answered 5 years ago by George Thomson

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Redring Slimline 650 9.5kw - Chrome (53558202) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Redring Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Redring Electric Showers

For any other support request please get in touch.