This question is regarding Redring Slimline 650 9.5kw - Chrome (53558202) - Shower Spares

shower not switching off

Shower will not turn off at on/off button and the temperature buttons will not work ,only the top red light is lit.Could you tell me what part I need to replace please.
Asked 12 years ago by Anonymous

If when you switch off the shower at the main isolator and the shower keeps running then you have a faulty solenoid.

 

When you switch off the shower at the main isolator  and the water stops  running, then you have a faulty on/off switch or a faulty PCB or a micro switch that is sticking on.

 

If it works out that it is the is the PCB that is at fault due to the cost of the PCB you may want to consider just replacing the unit..

The Redring slimlines are here

http://www.shower-warehouse.com/showers/electric-showers/redring

Answered 12 years ago by Anonymous

Have you resolved it? i have the same problem but i think it is the push bottom that is not going straight into the hole to cut off contact with the board. It is just a piece of rubber that is worn out and softened with the usage. Did you manager to resolve it?

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Redring Slimline 650 9.5kw - Chrome (53558202) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Redring Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Redring Electric Showers

For any other support request please get in touch.