Redring Expression 500
Thanks
The things to check first are.
1 That the main valve coming into your house is fully open.
2 Then check that the valve on the line to the shower is fully open.
If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly the overheat safety device will turn
the power off until it cools Then it all starts again
Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally
If it is none of these things then probably it is time to consider a new shower
Unfortunately there is nothing that is a direct swap.
However....... Triton has recently brought out the T80Z this shower has been designed round being a retrofit unit (Tritons word not mine!)
The pipe work can be brought in from almost any position and there is a reasonable amount of space for cable entry from most positions.
Here is the link.
See Video at the foot of the page
Answered 13 years ago by The Shower Doctor
View Product and Order Online:
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Redring Thermal Cut-out (TCO) with Tabs - 93597836
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Redring Thermal Cut Outs Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Redring Thermal Cut Outs
For any other support request please get in touch.