Reliance Showerguard E3 Concealed Sequential Control Shower - 15mm

• Provides stable mixed water temperature
• Rotational elbows through 360 degrees to suit any pipework orientation
• Includes check valve, strainer and flow regulator (plus isolators on C3 model

The Showerguard E3 and C3 shower controls are TMV3 approved thermostatic sequential showers. A sequential control is where the on/off operation and temperature control are achieved by turning the same control knob; the first movement turns the shower to the cold position and subsequent movement counter clockwise increases the temperature up to a set maximum (pre-set 38°C).

They are built around a signle cartridge principle, meaning that the main working components are included in an easy to replace one-piece cartridge. Each shower includes integral check valves and strainers. The Showerguard C3 also icorporates built-in isolators. Both inlet and outlet connections can be altered on site for complete flexibility of installation, to suit the orientation of the supply pipes. In addition to this the outlet fitting can be removed and reversed so that top or bottom connections can be used.

Specification:

• Rapid failsafe on both hot and cold supply failure
• Provides stable mixed water temperature
• Lever handle for ease of use
• Rotational elbows through 360° to suit any pipework orientation
• Top or bottom outlets can be changed on site for flexibility
• Single piece thermostatic cartridge, same for both E3 and C3 models
• Includes check valve, strainer and flow regulator (plus isolators on C3 model