Showerforce 9.5 Pressure Selection Problem

Our Showerforce 9.5 will only work on the low pressure setting. However, when I turn it off at the main switch and turn it back on, it will operate correctly for a while, then the problem re-occurs. Any ideas what is causing this? (I guess it might be either the pressure switch assembly or the low-pressure microswitch but I'd like to be sure before I order a replacement...
Asked 12 years ago by Anonymous

Forgetting about the temperature turn the shower from fully hot to fully cold at fully hot you should have not much more than a dribble coming from the hose and on fully cold you should have a good strong flow, if you do not have this difference then you may have a faulty flow/stabilizer  valve


Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Showerforce 7.8 8.5 9.5 and 10.4 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Showerforce Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Showerforce Electric Showers

For any other support request please get in touch.