TO Hot

Shower on High is to hot to scolding point even turned right down on temp gauge.

Turn to medium and seems to work ok again
Asked 10 years ago by Neil

 Thethings to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

If these valves are not fully open then there may not be enough water
getting to your shower to cool it properly, the overheat safety devicewill turn
the power off until it cools, then it then it starts to heat again andso on.

Make sure that the shower headis clean and clear, that the hose isn’t kinked (this can happen just behind thehand set where it is difficult to see) also check the inside of the hosealthough it can look OK on the outside it could have collapsed internally


Answered 10 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Showerforce 7.8 8.5 9.5 and 10.4 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Showerforce Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Showerforce Electric Showers

For any other support request please get in touch.