showerforce 91t

just fitted this item and for some reason it either comes out cold,taken it apart and now comes out extremley hot, have taken apart yet again now is tepid,,any clues to what wrong with this item..many thanks.. Mrs Rofe
Asked 13 years ago by Anonymous

 I would remove the shower from the wall and flush out both supply pipes also make sure that the volume of the water coming from each supply pipe is roughly similar.

Also check that the valve is fitted the correct way round


Hot to the left cold to the right as you are standing in the bath /shower looking at it.


The only other thing I can think off is a sticking check valve in one of the inlet elbows

Answered 13 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Showerforce 912 T (Newteam) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Showerforce Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Showerforce Concealed Shower Valves

For any other support request please get in touch.