973 seal kit
Withthe Sirrus 1500 or 1800 series that in almost every occasion the firstthing to do is give them a strip down clean and lube and fit a servicekit, this will cure 85% of any problems and it is also the cheapestthing to do.
Ifafter servicing you find out that it needs a thermostat or piston,nothing is really lost because it almost certainly needed a service inany case.
The 1500
Theseal that shuts the water off is the seal that fits into the base ofpart 5 in an old valve this looks like a flat washer, it is in fact athick heavy ‘O’ ring, this can be a difficult seal to fit.
Whenfitting make sure that all the old seal is removed and no bits arehiding under the lip, give the seal a heat in hot water and make surethat the seal is well greased before fitting, once it is pressed inthere can be bumpy bits on the face of the seal, rolling and pressing ascrewdriver handle over the bumps a few times can help to smooth themout.
Theseal housing is available which has the washer already pressed in iffor some reason you have difficulty fitting the new seal.
http://www.showerdoc.com/gum-sk1500-22-sirrus-ts1500-housing-kit-sk1500-22
Answered 11 years ago by Anonymous
View Spares and Order Parts:
Showerforce 973-t 974-t (Newteam) Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Showerforce 973-t 974-t (Newteam) - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Showerforce Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Showerforce Concealed Shower Valves
For any other support request please get in touch.