This question is regarding Showerforce Easiboost Pump Spares

leaking easiboost

My easyboost which has worked well for 5 years has developed a leak which I think is at the bottom of the unit. The inlet and outlet hoses and connectors seem fine. Pump is still working and the leak is slow but steady and difficult to see or feel. Could it be the inlet plate 'o' ring. Are there 1 or 2 of these on the pump and would replacing these solve the problem or would it be better to replace the whole unit. I haven't taken the unit out as there are no isolation valve on the system.
Asked 11 years ago by Anonymous
Yes it could be the inlet plate "O" ring that is at fault, but it may also be a shaft seal, ( unavailable ). There are two inlet plate "O" rings, one at each end and you could change these first to see if the situation improves. If you go down the route of changing the pump I would fit isolation valves on the inlets and outlets.

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Showerforce Easiboost Pump Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Showerforce Shower Pumps Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Showerforce Shower Pumps

For any other support request please get in touch.