This question is regarding Showerforce Regal - Shower Spares

identification

My shower runs for a few min. Then slows up and grinds to a halt.If left for a while, same thing happens. Suspect 'motor/pump' assy? My unit says 'Powerforce Regal' on the front and looks very like this one except the 'pressure knob'' is round, knurled. It is probably 20 yrs since I fitted it. Do you think this is the same model? Mine is thermostatically controlled. Could mine be the 'Regal Plus'? What is the difference? I don't want to fit the replacement, only the part as I let this one into the wall and, we are selling the house. Hope you can help......Keith.
Asked 12 years ago by Anonymous

As I recollect none of the Regal’s were thermostatic If you send me a photo of the internals I will be able to tell.

 

It sounds like you need a new motor and pump unit or you may get away with just fitting a new set of brushes to the motor.

 

We would always advise changing the complete motor and pump unit however the brushes are much cheaper.

http://www.showerdoc.com/shower-spares/showerforce/HYDR-01102-Sintech-Motor-Carbon-Brushes-(pair)---In-Brass-Casing-01102

http://www.showerdoc.com/shower-spares/showerforce/NEWT-SP-087-0221-NewTeam-Motor-pump-Unit-240v-SP-087-0221

 

Answered 12 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Showerforce Regal - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Showerforce Power Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Showerforce Power Showers

For any other support request please get in touch.