This question is regarding Showerforce Victorian T (Newteam) - Shower Spares

Shower gradually keeps getting colder1

I have the above shower for as long as i can remember and it has served me well, however, in the last few years it has taken to running cold despite alteration to the thermostatic control. It has had 2 new thermostats and a new piston in the last year but has again started running cold!
Asked 9 years ago by Anonymous

Have you fitted a service kit?

www.showerdoc.com/sirrus-valve-service-kit-sk1500-1

If it has inlet filters (Not all have) have you checked that they are clean?


If it is on a combi boiler try the check below.

Regarding the temperature fluctuation or cool running, it could be a faulty cartridge. However to check this if you have the shower fed from a combi boiler, see if you can get hold of the hot supply pipe before it enters the shower or perhaps as it leaves the boiler.

 

If when holding this pipe the temperature fluctuates or goes cool, then the problem is not with the shower but more likely with the boiler, as the shower can only deliver what the boiler sends to it. 

Disregard the temperature at the taps as they have a different flow rate.

 


Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Showerforce Victorian T (Newteam) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Showerforce Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Showerforce Concealed Shower Valves

For any other support request please get in touch.