This question is regarding Showerforce Victorian T (Newteam) - Shower Spares

Showerforce victorian mixer - running off a combi

When the shower valve is turned off it is allowing cold to pass through the valve and up the hot pipework causing nearby bath hot tap to lose temp to approx 45deg C. I proved this by removing the shower valve, capping the pipes and the bath hot tap returned to 60plus degrees when opened. Can the valve be repaired by replacing any of the parts, and if so which parts?
Asked 6 years ago by David
www.showerdoc.com/sirrus-inlet-elbow-assembly-chrome-sk1500-9cp

This is usually caused by a non return in the hot elbow failing.

You can replace this, switch over the elbows or fit a non return valve to the hot side.

Answered 6 years ago by Barrie Seabright

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Showerforce Victorian T (Newteam) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Showerforce Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Showerforce Concealed Shower Valves

For any other support request please get in touch.