Showerforce victorian t dripping...
The answer is really the same as last time.
The sealthat shuts the water off is the seal that fits into the base of part 11 (It isa thick heavy ‘O’ ring.) this can be a difficult seal to fit.
Whenfitted there can be bumpy bits on the face of the seal, making sure that theseal is well greased before fitting and rolling a screwdriver handle over thebumps a few times can help to smooth them out.
The halfcartridge is available however unless it is damaged it is unlikely to be thatthat is causing the valve to pass.
If this seal has been replaced and it is sitting into thewasher plate properly and you still have the problem then I think you will haveto replace the complete cartridge.
Answered 12 years ago by The Shower Doctor
View Spares and Order Parts:
Showerforce Victorian T (Newteam) Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Showerforce Victorian T (Newteam) - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Showerforce Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Showerforce Concealed Shower Valves
For any other support request please get in touch.