Pressure increases and runs cold after 2.5 mins!
With the Sirrus 1800 series that in almost every occasion thefirst thing to do is give them a strip down clean and lube and fit a servicekit, this will cure 85% of any problems and it is also the cheapest thing todo.
If after servicing you find out that it needs a thermostat or piston,nothing is really lost because it almost certainly needed a service in anycase.
The 1800
Then again it may be the boiler that needs adjusting.To check whether you have a boiler or shower fault.
Turn the shower on as usual, try and get a hold of the pipe going tothe shower, if you can’t get to the pipe at the shower you may be able to get toit as it leaves the boiler.
What ever the temperature is on/in this pipe, the shower can neverget any hotter than that (So if the temperature is cool then something then atthe boiler is not allowing the water to heat up enough)
The other fault is wide variations in thetemperature of the water leaving the boiler.
A thermostatic shower valve should be able to even out smallvariations in temperature however if you have large variations then you have aboiler fault.
Answered 11 years ago by Anonymous
View Spares and Order Parts:
Sirrus 1850 / 1850 Dual Shower Valve (including Sirrus Stratus 1850) Shower Spares
Do you need any additional help to find the correct spare part?
Please click the following link if you would like to see other answers or ask a question regarding the Sirrus 1850 / 1850 Dual Shower Valve (including Sirrus Stratus 1850) - Shower Spares
If you've landed here and this question is not about your specific product, please take a look at these similar items on our Sirrus by Gummers Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.
If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Sirrus by Gummers Concealed Shower Valves
For any other support request please get in touch.