This question is regarding Sirrus 1850 / 1850 Dual Shower Valve (including Sirrus Stratus 1850) - Shower Spares

sirrus 1850

Hi I have a Sirrus 1850 in ensuite that is feed by a combi boiler(under 2 years old). The shower has gradually gone to just a drip. If I turn the temp control to cold then there is more pressure but as soon I turn up temp it goes to a drip agian. Does anyone know if I need to replace cartridge and thermostat or something else? I have the same shower in family bathroom which works fine!



Many thanks hopefuly!
Asked 12 years ago by Anonymous

This valve may respond to a strip down clean and lube, and fitting a service kit.

If this doesn’t work then you will have to strip the valve down again and fit a new thermostat and piston assembly, or you may wish just to bite the bullet and do them both at the same time.

The seal kit covers more than one valve so lay out the new seal kit, remove the old seal from the valve match it and fit it you will have seals left over this is OK!

www.showerdoc.com/gum-sk1850-1-sirrus-seal-kit---1850-968-valve-sk1850-1

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Sirrus 1850 / 1850 Dual Shower Valve (including Sirrus Stratus 1850) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Sirrus by Gummers Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Sirrus by Gummers Concealed Shower Valves

For any other support request please get in touch.