This question is regarding Sirrus Heritage Dual Control - Shower Spares

Sirrus Heritage Dual Control Service

I cannot move the temperature selection lever either way and the shower runs too hot; do I have a scaling problem or is the mechanism broken? Your diagram looks extremely complex.
Asked 13 years ago by Anonymous

Hi

 

It probably only needs a strip down, clean, lube and a service kit fitted.

http://www.showerdoc.com/shower-spares/sirrus-by-gummers/GUM-PARENT-19-Sirrus-Heritage-Dual-Control

When you take it to bits it is probably less complicated than it looks.

 

If you do decide to strip it down you do have to be methodical noting where screws/nuts etc. come from and what goes where and the parts orientation, it is always a good idea to take photos as you go because you can refer to them when you are rebuilding.

Link to seal kit.

 

http://www.showerdoc.com/shower-spares/sirrus-by-gummers/GUM-SK1850-1-Sirrus-Seal-Kit---1850-968-Valve-SK1850-1

 

 

 

 

Answered 13 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Sirrus Heritage Dual Control - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Sirrus by Gummers Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Sirrus by Gummers Concealed Shower Valves

For any other support request please get in touch.