This question is regarding Sirrus Ts 1503 Thermostatic Shower Valve - Shower Spares

ts 1503 themostatic

water drips from the spindle when the shower is in use. have purchased the service kit, but unable to remove spindle. any ideas?
Asked 12 years ago by Anonymous

First you need to remove the cartridge from the valve.

 

This is an exploded view of the valve

 

http://www.showerdoc.com/shower-spares/sirrus-by-gummers/GUM-PARENT-34-Sirrus-1500---Thermostatic-Shower

 

This is the cartridge

 

http://www.showerdoc.com/shower-spares/sirrus-by-gummers/GUM-SK1500-2-Sirrus-Thermostatic-Cartridge-(no-Thermostat)-Standard-SK1500-2

 

When this is removed you need to slide a flat bar throughthe slots (A file or something similar will do)

 

Using the flat bar and a spanner on the nut, unscrew thefront half of the cartridge from the body, when they are separated,  remove the circlip from the end of the spindle,you should then be able to push the spindle and thrust nut etc out from thebody of the cartridge housing

Answered 12 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Sirrus Ts 1503 Thermostatic Shower Valve - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Sirrus by Gummers Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Sirrus by Gummers Concealed Shower Valves

For any other support request please get in touch.