PLEASE NOTE :
THIS VALVE NOW COMES WITH A BRAIDED HOSE TO CONNECT THE TWO VALVES TOGETHER INSTEAD OF THE VALVE BEING ONE CAST ASSEMBLY. THIS NOW ENABLES THE VALVE TO FIT CABIN WITH DIAL DISTANCES BETWEEN APPROX 100MM - 200MM
SEE VIDEO ON HOW TO CHANGE OVER AND NOTES BELOW:
Two dial thermostatic shower valve designed for showers two, three, four or five outputs(ie Hand shower, Monsoon and Body Jets). Inputs for Hot and Cold water. These thermostatic shower valves are commonly found in self-contained steam & shower cabins, shower pods and shower units.
Hose connections with these shower mixers are by way of either of the following:-
- Push-fit connections that are secured by way of Jubilee clips.
- Threaded connections that are secured by way of 1/2 screw fit connections.
Have A Steam Shower? If your shower houses a steam generator, for ALL these valves below you will need to purchase a 15mm Brass T-Piece that simply connects to the cold water input and this will feed a cold water supply to the steam generator.
This model has a braided hose connector for accommodating fixing centres between 100mm – 200mm. Watch the video below on how this connecting hose works.
Measurements Between Dials
100mm – 200mm Centres
Fixing Positions:
Top: 20mm
1 Year Warranty
Chrome Finish