problems with water temp

hi i fitted a salamander 1.5 shower pump which pumps the water through a manual mixer valve. The problem now is that the mixer valve has to be turned almost to the max hot to get a hot shower. With the shower head removed we get hot water with mixer valve mid way between max hot and cold and it is fine. Could this be because the shower head is to restricted? could you recommend a shower head. Thankyou Graham French
Asked 12 years ago by Anonymous

You don’t mention which mixing valve you have however with a manual mixer with a pump the pressure on both shower valve inlets should be the same therefore the shower heads “should” have no effect on the temperature.

My two thoughts are check that the filters on the pump inlets are clean (Some debris in the pipe work may have been disturbed when you switched the water on and off) and see if you can borrow some ones shower head to test the problem.

 

 

Answered 12 years ago by Anonymous

View Product and Order Online:

Are you looking for more information on this shower accessory?

Please click the following link if you would like to see other answers or ask a question regarding the SupaJet 3 Mode Handset & Inset - 1576400

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Supajet Shower Accessories page. Alternatively, if you're looking for any other brands you should view our full range of Shower Accessories.

If you are interested in buying this product or something similar please see our full range of Supajet Other Accessories

For any other support request please get in touch.