This question is regarding Trevi Boost Mains Pressure Shower with Elipse kit (built in) - Shower Spares

Trevi Boost Built-In Mains Pressure Shower Valve And Elipse Biv Shower Kit Shower Valve

Hi

My shower is about 10 years old and when turned off it has started dripping. If you continue to turn the water supply knob to the right it sometimes stops. Can you please tell me what parts are required to stop the water from dripping.



Thanks



Jim
Asked 11 years ago by Anonymous

There two cartridges one for the hot and one for the cold there can be two reasons for the gears not turning one is that the gears have become worn and don’t have enough grip to turn the on/off cartridges.

However the more common fault is that one of the cartridges has become tight and will not turn easily.

If you remove the centre spindle and use your fingers on the gears to turn the cartridges on and off you can often tell that one is tightening up.

If you are replacing the flow cartridges then it is advisable to replace both

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Trevi Boost Mains Pressure Shower with Elipse kit (built in) - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Trevi Concealed Shower Valves Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Trevi Concealed Shower Valves

For any other support request please get in touch.