This question is regarding Triton Alfie Holder Chrome 20.4mm - 83308810

Triton Alfie Holder Chrome 20.4mm

I have a Metro Thermostatic Shower mixer set. Is this holder the nearest product to fit this as a spare part to replace. I'm trying to find the nearest one as possible. It has the same press button to raise the slider up & down but concerned that it won't fit the slider rail. If it's not the correct fit can you suggest the correct part. Many thanks Regards Vanessa
Asked 4 years ago by Vanessa Trythall, TWICKENHAM
Rails and slider brackets are not usually shower specific.

Measuring through the centre of your shower rail outside edge to outside edge, will give its diameter and you can use this to find the correct size when choosing a slider bracket which will fit.

www.showerdoc.com/shower-accessories/slider-brackets

Something such as this , www.showerdoc.com/mx-combo-white-chrome-adjustable-rail-kit-hgx may be a better option.

Answered 4 years ago by Barrie Seabright

Thanks. I have measured the diameter of the shower rail & measures 6.5cm. The one you suggested below in your message will that fit?
The style I have currently is a push button to slide up and down. And appears to be held by rubber inside the tube to slide up & down.
I also have a problem with my click clack bath for waste/blocking of hairs. I bought a sink strainer at the supermarket to stop waste/hair blockage, but of course doesn't fit esp with the pressure of the shower & the click clack fitting sticks up too much that it doesn't fit over that area properly. Any recommendations for this problem too?

Many thanks

Answered 4 years ago by Vanessa Trythall

Good Morning

Thank you for contacting the shower doctor

Slider Brackets come in various sizes, you would need to measure the diameter of your rail once you have done this give our sales team a a call on 0131 538 4343 (option1) who will happily help you find the correct one for your shower.

Kind Regards

The Shower Doc

Answered 4 years ago by Jay Mack-Innes

Hi I have ordered 2 x bristan slider bracket which is to fit 25mm riser bracket. My slider rail measures 6.5cm full diameter (half that it's 3.25cm). Will this fit my slider rail? I haven't opened the package yet. When I phoned customer services they said it was ok to send back if it doesn't fit, after opening.
The whole shower unit is a Metro Thermostatic shower mixer bought from the bathstore.
Please see attached image if this helps.
Many thanks
Regards
Vanessa

Answered 4 years ago by Vanessa Trythall

Your rail diameter needs to be 21mm for this to fit. You need to measure it again, as the sizes given are incorrect.

Answered 4 years ago by Barrie Seabright

Hi Just measured the full diameter & measures 6.5cm. That is the measurement all the way around the rail.
Not sure how other way to measure the rail?

Answered 4 years ago by Vanessa Trythall



Measuring through the centre of your shower rail outside edge to outside edge, will give its diameter and you can use this to find the correct size when choosing a slider bracket which will fit.

Answered 4 years ago by Barrie Seabright

Hi done the measurement again full diameter is 6.5cm. I will give you a call in the morning when your offices is open

Answered 4 years ago by Vanessa Trythall

Hi Team
All items didn't fit, now that I have finally taken the rail apart & measured properly. It needs a 18mm slider bracket,
I will take another look online again.
The 24mm fitting the place where you fit the hose fitted well but the 22mm didn't fit the hose. My hose is quite thick.

So I need to find an 18 mm push button shower head slider bracket but fits (the 24mm opening for the hose from one of the items I have ordered).

Any recommendations, you have the attached image of what I'm looking for.
Posting all 3 itms in the post with the documents.
Many thanks
Vanessa
p.s my fault I was originally measuring the full circumference! It helped taking the whole rail so I could measure properly

Answered 4 years ago by Vanessa Trythall

View Product and Order Online:

Are you looking for more information on this shower accessory?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Alfie Holder Chrome 20.4mm - 83308810

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Shower Accessories page. Alternatively, if you're looking for any other brands you should view our full range of Shower Accessories.

If you are interested in buying this product or something similar please see our full range of Triton Shower Head Holders

For any other support request please get in touch.