Triton 9.5kW t80si

The water keeps coming too hot then goes cold.please advise.
Asked 7 years ago by Shan
Shower going hot and cold

First check that the main valve coming into your house is fully open. Then check all the valves on the line to the shower is fully open. If there isn’t enough water to cool the shower properly the safety device will turn off the power until it cools and starts to heat again- this cycle will keep repeating until corrected.

Make sure that the shower head is clean and that the hose isn’t kinked. Check the hose thoroughly- it may look okay externally but could have collapsed internally.

The other possibility is a faulty flow/stabilizer valve not allowing the correct amount of water into the shower.

A rough check is to remove the shower head, turn the temperature control to fully hot. Take a note of the water flow. Then turn the water to fully cold. If there isn’t a big difference between the two then you could have a faulty flow valve.

A replacement flow valve may be purchased online here: www.showerdoc.com/triton-t80si-shower-spares

Answered 7 years ago by Anonymous

View Product and Order Online:

Do you require any more information about this shower?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Alicante 9.5kW Electric Shower (White/Chrome) - AGD

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Showers page. Alternatively, if you're looking for any other brands you should view our full range of Showers.

If you would like to buy this item or look at something similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.