This question is regarding Triton Amber II - Shower Spares

Only hot water after approx 2 minutes of running

Hi,

After approx 2 minutes of running the shower, the water goes gradually hot and cannot be controlled from the control knob. If I swith it off and turn it back on it only comes hot water. If I switch the shower Off from the main switch I can get cold water and then gradually goes hot. Can you tell me which part is broken.

Thaks,

C.
Asked 12 years ago by Anonymous
Check that shower hose is not kinked or collapsed internally and the shower head is clear.
Check incoming mains water stopcock and any isolation valve in the feed to the shower are eully open.
Check with your supplier if there has been any reduction in water supply flow or pressure.
Check that the gauze filter in the inlet to the solenoid valve is clear.
If all above are ok then it is likely to be the stabiliser valve at fault and replacement can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-82600720-Triton-Stabilising-Valve-Assembly---7kw-82600720

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Amber II - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.