prd replacement

how to fit a prd to shower
Asked 12 years ago by Anonymous

The pressure relief device is a safety deviceon the bottom of the heating tank.

 

It is fairly easy to replace however there isusually something that causes it to blow,

often a kink in the hose or the showerhead isblocked, so check this before fitting the new PRD.

 

http://www.showerdoc.com/TRITO-83301330-PRD-(Pressure-Relief-Device)-and-'O'-ring-(Pair)?ss=prd&pg=2

There are fitting instructions that come withit, however  you need to switch off thepower and it is safer but not necessary to turn off the water supply to theunit.

You will need to remove the screws that holdthe heating tank in place and probably slacken off some other screws to allowenough movement to give you room to remove the existing PRD

The only thing to watch is that you make surethat you remove the existing ‘O’ ring as it can stick in position and the newPRD will not fit if the existing ‘O’ Ring is left in place

.

 

Answered 12 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Aquatronic 1 - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.