aquatronic plus 2

Water runs at hottest temp and will not turn down, shower flows well so doesnt appear to be any blockages?
Asked 13 years ago by Anonymous
Check tnat hose is not kinked or collapsed internally and the head is clear.
Check with your water supplier if there has been a reduction in supply or flow.
Check that mains stopcock and any isolation valve in supply to shower are fully open.
Check that gauze filter in inlet to solenoid valve is clear.
If all above are ok then it is likely to be the stabiliser valve at fault, a replacement can be ordered online by clicking on the link below.

http://www.showerdoc.com/shower-spares/triton/TRITO-82600550-Triton-Stabiliser-Valve-Assembly-(7-5-8-5-9-5kw)-82600550

Answered 13 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Aquatronic 2 plus electric - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.