This question is regarding Triton Aquatronic 3 electric - Shower Spares

Aquatronic 3 Not Working

Our Aquatronic 3 stopped working the other day. Checked the solenoid coil with multimeter, reading ~3.6k ohms. Replaced it anyway, still no joy.



Shower is getting power, i.e. light comes on. Low pressure flag remains red, and don't get any water flow at all.



Any ideas?
Asked 12 years ago by Anonymous

Unusual problem ....however

The things to check first are.

1 That the main valve coming into your house is fully open.

2 Then check that the valve on the line to the shower is fully open.

Make sure that the shower head is clean and clear, that the hose isn’t kinked (this can happen just behind the hand set where it is difficult to see) also check the inside of the hose although it can look OK on the outside it could have collapsed internally

Just reread the ticket and noticed that you only replaced the coil and according to your reading the original coil was OK, could it be the solenoid its self that is faulty?

Answered 12 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Aquatronic 3 electric - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.