This question is regarding Triton Aquatronic 3 electric - Shower Spares

Hot shower

Hi there,I have a problem with my aquatronic 3 plus shower I emailed yesterday and who ever replied said to check the feed pipes to see if they r clear I have done that and they r all ok,the problem with my shower is when I turn it on it runs cold so I have to turn it to the max setting to get the hot water coming through when I turn it back to the setting I normally have It on the water is red hot if I turn it down even a little bit it goes ice cold !i then have to turn it right up to the max to get the hot water back through but it's red hot again, need some help please
Asked 10 years ago by Ricjard

Forgetting about the temperature, turn the showerfrom fully hot to fully cold. At fully hot you should have not much more than adribble coming from the hose, and on fully cold you should have a good strongflow. If you do not have this difference then you may have a faultyflow/stabilizer valve.

Answered 10 years ago by Anonymous

I have tried the suggested solution of turning from hot to cold & back again. Would this still appear to be a faulty flow/stabiliser valve?

Answered 9 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Aquatronic 3 electric - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.