Aquatronic 3 Ultra - heating fault

Using the above shower when the water suddenly stopped, and the main fuse unit was tripped. After resetting the trip, the shower works, but seems like it is only using the 1st stage of the water heating element. Switching to low heat or high heat seems to make no difference to the water temperature. I have a multimeter, what is the recommended procedure to identify the fault? Thanks. RS
Asked 11 years ago by Anonymous

It maybe a faulty element in the heating tank (there are two, three in most 10kwshowers) you can check them with a multi meter you should have a reading ofaround 12>18 ohms.

If you have power to the elementsand no heat it's probably the elements, no power to the elements thenit's probably a micro switch.

 http://www.youtube.com/watch?v=wzPt1hsfVq4&feature=player_embedded

Answered 11 years ago by The Shower Doctor

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Aquatronic 3 ultra electric - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.