This question is regarding Triton Aquatronic 4 electric - Shower Spares

Aquatronic 4 has low heat but elements ok

My 9.5k shower recently stopped producing useably hot water on the high heat setting. The knob has to be turned nearly fully clockwise to get a decent temperature, but of course with a corresponding loss in shower head pressure.



Both heater elements show 12 ohms with a multimeter, so what do I check next, and how do I do it?
Asked 11 years ago by Mark
I would check the inlets, hose and head  for blockages and if these are clear then,
forgetting about the temperature turn the shower from fully hot to fully cold at fully hot you should have not much more than a dribble coming from the hose and on fully cold you should have a good strong flow, if you do not have this difference then you may have a faulty flow/stabilizer valve

Answered 11 years ago by Anonymous

View Spares and Order Parts:

Do you need any additional help to find the correct spare part?

Please click the following link if you would like to see other answers or ask a question regarding the Triton Aquatronic 4 electric - Shower Spares

If you've landed here and this question is not about your specific product, please take a look at these similar items on our Triton Electric Showers Spares page. Alternatively, if you're looking for any other brands you should view our full range of Shower Spares.

If you do not want to proceed with a repair or you want to buy this item or similar, please consider one of our Replacement Triton Electric Showers

For any other support request please get in touch.